With the software release of the version V2019-05-13 the continuous operation for the SE-7xx devices is realized.
"Continuous operation" is required, for example, for continuous furnaces in which a temperature profile is not created by the time sequence of the programmer but by the product passing through several differently tempered furnace zones or chambers on a conveyor system.
Typical applications are e.g. ceramic products, where the raw ceramic is carefully heated up in several stages within a continuous furnace, then finally brought to the firing temperature and then carefully cooled down again in several steps.
For further information please contact our sales department.
Due to the general further development in electronics, the CPU board in the SE-600-BB, SE-604, SE-607 and SE-609 had to be adapted. This results in the exchange of some files for compatibility reasons.
Information about the easy change from the device series (TRG-05) or (TRG-06) to the new hardware (TRG-07) can be found here.
The production of the program controllers SE-402, SE-502 and SE-504 is discontinued with immediate effect due to non-availability of components.
We can guarantee spare parts and repairs for devices that have been delivered in the last 10 years.
For the simple exchange of SE-402 program controllers, we are currently working on an replacement solution based on the upcoming SE-701.
For SE-502 and SE-504, the SE-702 is available as a cost-effective and modern solution.
Contact us, we will be happy to advise you.