Entreprise

Produits

Contrôles automatisation

Génération 5

Demander l´information

Support

Produits

Contrôles automatisation

Génération 5

Contrôleur de procédés SE-504

- Boîtier 288 x 144 mm, profondeur 100 mm
- Façade IP65
- Connexion carte mémoire (données de configuration et
de programme)
- Interface PC RS 422
- Interface CAN-Maître pour connexion de la périphérie

Power supply, 115..230V ± 15% / 50..60Hz
Front panel with foil keyboard, IP65 protection mode
Serial interface RS422, electrically isolated, for configuration and for the connection of a process control system
CAN interface with CANopen protocol for the connection of up to 15 CAN nodes
1 free outlet for further interfaces (SI-CANPIG-S or SI-PBPIG-S)
For periodic and continuous processes

Fonctions SE-504
Programmateur - 30 consignes - 64 pistes numériques - 50 programmes	Zones de régulation - 20 zones de régulation - 8 jeux de paramètres/zone - 2 bande de tolérance/zone - 2 valeurs limite/zone
Valeurs réelles - 48 entrées valeurs réelles (signaux normalisés, thermo couples, PT100)	Alarmes - 200 alarmes
Formules - 20 formules Tolérances - 40 tolérances Valeurs limite - 40 valeurs limite	Automate programmable - 1600 instructions - programmable par liste d’instructions Fonctions spéciales - Régulation niveau C, humiditié relative, régulation index de nitrification Langue dialogue: Anglais, Français, Allemand Option: Espagnol, Italien, Suédois, Finnois, Russe

Additional Equipment for SE-504: Hardware / Software (optional)
Designation	Art.No.
Arithmetic module Expansion board, module with arithmetic processor for complex mathematic calculations Beside the basic arithmetic operations, with this module there are applicable parenthesis operations, square root calculation, natural logarithm, common logarithm, and exponential function.	NT504-24V
Serial communication module for SE-504 Communication with foreign devices or connection of several STANGE units among themselves (log: JBUS RTU or Modbus RTU; Interface: RS232, RS422 or RS485). Transfer of analog and digital informations possible.	SI-SER-I/O
S5-compatible PLC (PC104 module) 20.000 commands (CPU928B command set), programmable with SIEMENS programming software for S5.	SPS-928CPU
CAN-slave (piggy-pack) Interface with CANopen protocol for the connection of an SE-504 as slave; the instrument behaves in the CAN system like a CAN base unit	SI-CANPIG-S
PROFIBUS DP-slave (piggy-pack) Interface for the connection of an SE-504 (slave mode) to a PROFIBUS system; the master may be f.e. an S7 PLC40 read analog values/40 write analog values, 320 read digital bits/320 write digital bits. Baud rate: 9.6kBaud up to 1.5MBaud	SI-PBPIG-S
Memory-Card Storage of configuration and programs	SM 1288
C-level control Software module for SE-504 (incl. arithmetic module)	C-PEGEL-504
Nitriding potential number for SE-504 Pre-calculation of the NH3 quantities on the basis of nitriding potential number, calculation of the current NPN on the basis of the actual values, alarm management, optimized driving over saving of gas media energy and handling time	NKZ-504
Operating-hours meter SE-504 Operation hour logging with 24 counters. By means of the operating-hours meter the actual working time of equipment components can be logged (e.g. pump running time, burner actual working time or the like) - counting up to 99999 hours (dissolution 1 second) - "release" inputs - individual control level for counter manipulation and/or counter reset - configurable limit value output	BSZ-504
Software update for SE-504 Diskette with download program in FLASH PROM, the software is installed by the customer in accordance with provided guidance.	UPDATE-504

Données Techniques

Une fiche détaillée est disponible en format pdf

Télécharger

Fichiers pdf peuvent être visualisés et imprimés avec le
logiciel gratuit Acrobat Reader © ™.


	page 3 of 5
retour	back to overview	avant

retour

Imprimer

Haut

STANGE Elektronik GmbH

Gutenbergstraße 3

51645 Gummersbach

Telefon (02261) 9579.0

Fax (02261) 55212

info@stange-elektronik.de