Oxygen trace analyzer including data logger for storing and saving measured data and PC software for editing, administrating and archiving data.
Oxygen Trace Analyzer
Oxygen trace analyzer with integrated data logger for measured value storage, incl. PC software to edit, administrate and archive measured data.
The oxygen trace analyzer is used for continuous oxygen concentration measurement in industry, in laboratory and protective gases as well as in case of mixture processes, production and the processing of special forming gases.
The device is equipped with an internal pump that can be switched on if required. Thereby the permanent exchange of atmosphere at measuring cell is given.
The recording rate is configurable, 350 days can be recorded in case of one second measuring interval.
Recorded data can be transferred to PC by USB interface.
The evaluation and processing of measured values is made by corresponding PC software, as well as personalization and DIN-ISO compatible protocol print out.
Technical Data
■ Measuring range: 0...20,6 Vol% O2
■ Measuring accuracy at normal pressure: rel. measuring errors < 5%
■ Measuring gas flow capacity: 5 ... 10 l/h (controlled automatically when using the internal pump)
■ Maximum allowable measuring gas pressure: 20 mbar overpressure
■ Maximum allowable measuring gas temperature: 80°C
■ Dimensions: 240x200x140 (WxHxD in mm)
■ Gas inlet/gas outlet: in each case fast locking coupling 6 mm
■ Degree of protection: IP 40
■ Power supply: wall power supply 24 VDC
■ Power consumption: 20 VA
■ Operation: touch screen
■ Display: LCD display monochrome 124x64 Pixel
■ Additional analog output: 0/4…20 mA correspond to 0...20,6 Vol%
■ Measuring data transmission: over USB interface to a PC
Accessories
■ PC Software (Requirements: WinXP (Prof.) SP2 or better)
|
Data Sheet
|
| A detailed data sheet is available as pdf file |
|
Pdf files can be viewed and printed with the free Acrobat© Reader™.
|
|
| 
