Probe for oxygen concentration measurement and carbon potential calculation in furnace atmospheres
Novel oxygen probe based on a special contacted zircon dioxid measuring cell.
Caused by the innovative probe design, response time and accuracy of measurement are considerably improved. The thermocouple (type S) is directly embedded in the zircon element. The probe is intended for direct gas atmosphere installation and is installed via stuffing box or KF-40 quick fastener (available as option). Lengths from 600 to 1000 mm are available, optionally with ceramic protective pipe.
Characteristics:
• High measuring accuracy
• Short response time
• High durability
Available from the fourth quarter of 2011
Technical Data:
• Protective pipe material: 1.4841, optionally ceramic
• Probe diameter: 28 mm
• Thermocouple: Type S
• Temperature range of application: up to 1050°C
• Other installation lengths: 600, 700, 800, 900 and 1000 mm
• Output signal: -1.500 mV up to 0 mV
• Connecting head: with reference and purge air connection
• Mechanical connection: stuffing box KF40 quick fastener adapter
• Electrical connection: 4-pole plug connector
Accessories:
• KF-40 quick fastener (optional)
• Connection adapter for fastener of other manufacturers (optional)
• Documentation
Please check if the operational conditions are in accordance with the aforementioned data. If deviations are existent, ask for consultation in order to check the conditions and be adapted if applicable.
Data Sheet
 C-Pegel-Sonde
Language:
 
| 
