 5th Generation |
|
|
 |
|
|
Program Controller SE-510 | | |
|
|
|
High-end industrial PC with integrated program controller on PCC-508 plug-in board,
Installation housing 19"/7HE,
Foil front panel (IP65), 15"-TFT-Display (1024x768),
Input over external keyboard/mouse |
-
- Current Pentium Slot-CPU
- 2 serial, 1 parallel, 2 USB (1.1) + 2 USB (2.0) interfaces
- 1x Ethernet RJ45 10/100 MBits, 1x Ethernet RJ45 1000 MBits
- FDD: floppy disk drive
- HDD: 2,5", 80 GB or more
- Operating system WIN XP Prof. OEM in German or Multilanguage
- 19" housing, 7 HE, depth 155mm
- Power supply 230 V / 50..60 Hz
- Foil front panel (IP65), sockets for external keyboard and PS/2 mouse (keyboard and mouse not included)
- 15"-TFT colour display 1024x768 pixel
- CAN-interface with CANopen protocol to connect up to 15 CAN nodes (CAN-BASIS4 with 4 plug-in slots for CAN-I/O modules)
- One free outlet for further interfaces (SI-CANPIG-S or SI-PBPIG-S)
|
Functions SE-510
|
Programmer
- 30 set values
- 64 digital tracks
- 50 programs
|
Controller
- 20 control zones
- 8 parameter sets/zone
- 2 tolerances/zone
- 2 limit values/zone |
Actual values:
- 48 actual value inputs
(standard signals, thermocouples, PT100) |
Alarms
- 200 alarms |
Formula
- 20 formula
Tolerances
- 40 tolerances
Limit values
- 40 limit values
|
PLC
- 1600 statement-list commands
Special functions
- C-level control, relative humidity,
nitriding potential control
Dialogue languages
English, French, German
Optional: Spanish, Italian, Swedish, Finnish, Russian
|
|
Additional Equipment for SE-510: Hardware / Software (optional)
|
| Designation |
Art.No.
|
|
Arithmetic module
Expansion board, module with arithmetic processor for complex mathematic calculations Beside the basic arithmetic operations, with this module there are applicable parenthesis operations, square root calculation, natural logarithm, common logarithm, and exponential function.
|
NT510-24V
|
|
Serial communication module for SE-510
Communication with foreign devices or connection of several STANGE units among themselves (log: JBUS RTU or Modbus RTU; Interface: RS232, RS422 or RS485). Transfer of analog and digital informations possible.
|
SI-SER-I/O |
|
S5-compatible PLC (PC104 module)
20.000 commands (CPU928B command set), programmable with SIEMENS programming software for S5.
|
SPS-928CPU
|
|
CAN-slave (piggy-pack)
Interface with CANopen protocol for the connection of an SE-510 as slave; the instrument behaves in the CAN system like a CAN base unit
|
SI-CANPIG-S |
|
PROFIBUS DP-slave (piggy-pack)
Interface for the connection of an SE-510 (slave mode) to a PROFIBUS system; the master may be f.e. an S7 PLC40 read analog values/40 write analog values, 320 read digital bits/320 write digital bits.
Baud rate: 9.6kBaud up to 1.5MBaud
|
SI-PBPIG-S |
|
Memory-Card
Storage of configuration and programs
|
SM 1288 |
|
C-level control
Software module for SE-510 (incl. arithmetic module)
|
C-PEGEL-510 |
|
Nitriding potential number for SE-510
Pre-calculation of the NH3 quantities on the basis of nitriding potential number, calculation of the current NPN on the basis of the actual values, alarm management, optimized driving over saving of gas media energy and handling time
|
NKZ-510 |
Operating-hours meter SE-510
Operation hour logging with 24 counters. By means of the operating-hours meter the actual working time of equipment components can be logged (e.g. pump running time, burner actual working time or the like)
- counting up to 99999 hours (dissolution 1 second)
- "release" inputs
- individual control level for counter manipulation and/or counter reset
- configurable limit value output |
BSZ-510 |
|
Software update for SE-510
Diskette with download program in FLASH PROM, the software is installed by the customer in accordance with provided guidance.
|
UPDATE-510 |
Data Sheet
 Program Controller SE-510
Language:
  
|
|
|
|
|
|
previous page
